Manualshelf

Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

ManualsBrandsHP ManualsDesktopHP BladeSystem bc2500 Blade PC
241242243244245246247248249250
18-28 www.hp.com HP PC Blade Switch CLI Reference Guide
QoS Commands
qos cos
The qos cos Interface Configuration (Ethernet, port-channel) mode command defines the default
CoS value of a port. To return to the default configuration, use the no form of this command.
Syntax
qos cos
default-cos
Parameters
n default-cos — Specifies the default CoS value of the port. (Range: 0-7)
Default Setting
Default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
If the port is trusted, the default CoS value of the port is used to assign a CoS value to all
untagged packets entering the port.
Example
The following command configures port e45 default CoS value to 3.
Console(config)# interface ethernet e45
Console(config-if) qos cos 3