Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 18-23
QoS Commands
qos map dscp-dp
The qos map dscp-dp global configuration mode command maps DSCP to Drop Precedence. To
return to the default setting, use the no form of this command.
Syntax
qos map dscp-dp dscp-list
to dp
no qos map dscp-dp
Parameters
n dscp-list — Specifies up to 8 DSCP values separated by a space (Range: 0-63).
n dp — Enter the Drop Precedence value to which the DSCP value corresponds.
(Possible values are 0 - 2 where 2 is the highest Drop Precedence)
Default Setting
All the DSCPs are mapped to Drop Precedence 0.
Command Mode
Global Configuration mode.
Command Usage
There are no user guidelines for this command.
Example
The following command maps DSCP to Drop Precedence.
console (config) # qos map dscp-dp 0 to 63