Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

18-2 www.hp.com HP PC Blade Switch CLI Reference Guide
QoS Commands
show qos
The show qos User EXEC mode command displays the quality of service (QoS) mode for the
device.
Syntax
show qos
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
Trust mode is displayed if QoS is enabled in basic mode.
Example
The following command displays QoS attributes when QoS is enabled in basic mode on the
device.
Console> show qos
Qos: basic
Basic trust: dscp