Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 17-3
Port Monitor Commands
show ports monitor
The show ports monitor User EXEC mode command displays the port monitoring status.
Syntax
show ports monitor
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the port monitoring status.
Console> show ports monitor
Source Port Destination
Port
Type Status VLAN
Tagging
----------- ---------------- ----- ------- ------------
e45 e46 RX,TX Active No
e43 e44 RX,TX Active No
e1 e42 RX Active No