Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 14-5
Management ACL Commands
management access-class
The management access-class Global Configuration mode command restricts management
connections by defining the active management access list. To disable this restriction, use the no
form of this command.
Syntax
management access-class {console-only | name}
no management access-class
Parameters
n console-only — Indicates that the device can be managed only from the console.
n name — Specifies the name of the access list to be used. (Range: 1-32 characters)
Default Setting
No active management access list specified.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures an access list called mlist as the management access list.
Console(config)# management access-class mlist