Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

12-2 www.hp.com HP PC Blade Switch CLI Reference Guide
LACP Commands
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command configures physical
port priority. To return to the default configuration, use the no
form of this command.
Syntax
lacp port-priority value
no lacp port-priority
Parameters
n value — Specifies port priority. (Range: 1 - 65535)
Default Setting
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines the priority of Ethernet port e45 as 247.
Console(config)# interface ethernet e45
Console(config-if)# lacp port-priority 247