Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 12-1
12
LACP Commands
lacp system-priority
The lacp system-priority Global Configuration mode command configures the system priority.
To return to the default configuration, use the no
form of this command.
Syntax
lacp system-priority value
no lacp system-priority
Parameters
n value — Specifies system priority value. (Range: 1-65535)
Default Setting
The default system priority is 1.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the system priority to 120.
Console(config)# lacp system-priority 120