Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 11-15

IP Addressing Commands

show hosts

The show hosts Privileged EXEC mode command displays the default domain name, a list of

name server hosts, the static and the cached list of host names and addresses.

Syntax

show hosts [name]

Parameters

n name — Specifies the host name. (Range: 1-158 characters)

Default Setting

This command has no default configuration.

Command Mode

Privileged EXEC mode

Command Usage

There are no user guidelines for this command.

Example

The following command displays host information.

Console# show hosts

System name: Device

Default domain is gm.com, sales.gm.com, usa.sales.gm.com(DHCP)

Name/address lookup is enabled

Name servers (Preference order): 176.16.1.18 176.16.1.19

Configured host name-to-address mapping:

Host Addresses

---- ---------

accounting.gm.com 176.16.8.8 176.16.8.9 (DHCP)

Cache: TTL (Hours)

Host Total Elapsed Type Addresses

---- ----- ------- ------ ---------