Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

11-12 www.hp.com HP PC Blade Switch CLI Reference Guide
IP Addressing Commands
ip host
The ip host Global Configuration mode command defines static host name-to-address mapping
in the host cache. To remove the name-to-address mapping, use the no form of this command.
Syntax
ip host name address
no ip host name
Parameters
n name — Name of the host (Range: 1-158 characters)
n address — Associated IP address.
Default Setting
No host is defined.
Command Mode
Global Configuration mode
Command Usage
Up to 8 host names can be configured.
Example
The following command defines a static host name-to-address mapping in the host cache.
Console(config)# ip host accounting.Marvell.com 176.10.23.1