Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

11-8 www.hp.com HP PC Blade Switch CLI Reference Guide
IP Addressing Commands
show arp
The show arp Privileged EXEC mode command displays entries in the ARP table.
Syntax
show arp
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays entries in the ARP table.
Console# show arp
ARP timeout: 80000 Seconds
Interface IP address HW address Status
--------- ---------- ----------------- -------
e1 10.7.1.102 00:10:B5:04:DB:4B Dynamic
e2 10.7.1.135 00:50:22:00:2A:A4 Static