Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 9-7
GVRP Commands
show gvrp configuration
The show gvrp configuration User EXEC mode command displays GVRP configuration
information, including timer values, whether GVRP and dynamic VLAN creation is enabled, and
which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface |
port-channel port-channel-number]
Parameters
n interface — A valid Ethernet port. (Full syntax: port)
n port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays GVRP configuration information:
Console> show gvrp configuration
GVRP Feature is currently enabled on the device.
Timers (milliseconds)
Port(s) Status Registration Dynamic
VLAN
Creation
Join Leave Leave All
------ ------- ------------ --------- ---- ----- ---------
e45 Enabled Normal Enabled 200 600 10000
e45 Enabled Normal Enabled 200 600 10000