Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-23
Ethernet Configuration Commands
show ports storm-control
The show ports storm-control User EXEC mode command displays the storm control
configuration.
Syntax
show ports storm-control [interface]
Parameters
n interface — A valid Ethernet port. (Full syntax: port)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode.
Command Usage
There are no user guidelines for this command.
Example
The following command displays the storm control configuration.
Console# show ports storm-control
Port State Rate
[Kbits/Sec]
Included
---- -------- ---------------- --------------------------------------
e1 Enabled 70 Broadcast, Multicast, Unknown Unicast
e1 Enabled 100 Broadcast
e1 Disabled 100 Broadcast