Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-17
Ethernet Configuration Commands
show interfaces counters
The show interfaces counters User EXEC mode command displays traffic seen by the physical
interface.
Syntax
show interfaces counters
[ethernet interface | port-channel port-channel-number]
Parameters
n interface — A valid Ethernet port. (Full syntax: port)
n port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays traffic seen by the physical interface:
Console# show interfaces counters
Port InOctets InUcastPkts InMcastPkts InBcastPkts
---- -------- ----------- ----------- -----------
e1 183892 0 0 0
e1 0 0 0 0
e1 123899 0 0 0
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
----- ---------- ------------ ------------ ------------
e1 9188 0 0 0
e1 0 0 0 0
e1 8789 0 0 0
Ch InOctets InUcastPkts InMcastPkts InBcastPkts
--- -------- ---------- ----------- -----------
1 27889 0 0 0
Ch OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
--- --------- ------------ ------------ ------------
1 23739 0 0 0