Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-15
Ethernet Configuration Commands
show interfaces status
The show interfaces status Privileged EXEC mode command displays the status of all
configured interfaces.
Syntax
show interfaces status [ethernet interface| port-channel port-channel-number]
Parameters
n interface — A valid Ethernet port. (Full syntax: port)
n port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the status of all configured interfaces:
Console# show interfaces status
Port Type Duplex Speed Neg Flow
Ctrl
Link
State
Back
Pressure
Mdix
Mode
---- ----------- ------ ----- ------- ---- ----- -------- ----
e1 100M-Copper Full 100 Enabled Off Up Disabled Auto
e2 100M-Copper Full 100 Enabled Off Up Disabled Auto
e3 100M-Copper Full 100 Enabled Off Up Disabled Auto
e4 100M-Copper Full 100 Enabled Off Up Disabled Auto
e5 100M-Copper Full 100 Enabled Off Up Disabled Auto
e6 100M-Copper Full 100 Enabled Off Up Disabled Auto
e7 100M-Copper Full 100 Enabled Off Up Disabled Auto
e8 100M-Copper Full 100 Enabled Off Up Disabled Auto
e9 100M-Copper Full 100 Enabled Off Up Disabled Auto
e10 100M-Copper Full 100 Enabled Off Up Disabled Auto
e11 100M-Copper Full 100 Enabled Off Up Disabled Auto
e12 100M-Copper Full 100 Enabled Off Up Disabled Auto
e13 100M-Copper Full 100 Enabled Off Up Disabled Auto
e14 100M-Copper Full 100 Enabled Off Up Disabled Auto
e15 100M-Copper Full 100 Enabled Off Up Disabled Auto
e16 100M-Copper Full 100 Enabled Off Up Disabled Auto