Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-11
Ethernet Configuration Commands
clear counters
The clear counters User EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
n port-channel-number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
User
EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In the following example, the counters for interface e1 are cleared.
Console> clear counters ethernet e1