Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

8-4 www.hp.com HP PC Blade Switch CLI Reference Guide
Ethernet Configuration Commands
description
The description Interface Configuration (Ethernet, port-channel) mode command adds a
description to an interface. To remove the description, use the no
form of this command.
Syntax
description
string
no description
Parameters
n string — Comment or a description of the port to enable the user to remember what is
attached to the port. (Range: 1-64 characters)
Default Setting
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following command adds a description to Ethernet port e45.
Console(config)# interface ethernet e45
Console(config-if)# description "RD SW#3"