Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

7-10 www.hp.com HP PC Blade Switch CLI Reference Guide
Configuration and Image File Commands
show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that
is loaded by the device at startup.
Syntax
show bootvar
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the active system image file that is loaded by the device at
startup.
Console# show bootvar
Images currently available on the flash
image-1 active (selected for next boot)
image-2 not active