Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 7-1
7
Configuration and Image File Commands
copy
The copy Privileged EXEC mode command copies files from a source to a destination.
Syntax
copy source-url destination-url
Parameters
n source-url — The source file location URL or reserved keyword of the source file to be
copied.
(Range: 1-160 characters)
n destination-url — The destination file URL or reserved keyword of the destination file.
(Range: 1-160 characters)
The following table displays keywords and URL prefixes:
Default Setting
This command has no default configuration.
Command Mode
Privileged
EXEC mode
Keyword Description
flash: Source or destination URL for flash memory. This is the default in
case a URL is specified without a prefix.
running-config Represents the current running configuration file.
startup-config Represents the startup configuration file.
image If the source file, represents the active image file. If the destination
file, represents the non-active image file.
boot Boot file.
tftp:// Source or destination URL for a TFTP network server. The syntax for
this alias is tftp://host/[directory]/filename. The host can be
represented by its IP address or hostname.
null: Null destination for copies or files. A remote file can be copied to
null to determine its size.
backup-config Represents the backup configuration file.This is a user-defined name
for up to five backup configuration files.