Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 6-11
Clock Commands
sntp anycast client enable
The sntp anycast client enable Global Configuration mode command enables SNTP anycast
client. To disable the SNTP anycast client, use the no form of this command.
Syntax
sntp anycast client enable
no sntp anycast client enable
Parameters
There are no parameters for this command.
Default Setting
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Polling time is determined by the sntp client poll timer Global Configuration mode command.
Use the sntp client enable (Interface
) Interface Configuration mode command to enable the
SNTP client on a specific interface.
Example
The following command enables the SNTP anycast clients.
Console(config)# sntp anycast client enable