Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 6-9
Clock Commands
sntp client poll timer
The sntp client poll timer Global Configuration mode command sets the polling time for the
Simple Network Time Protocol (SNTP) client. To return to default configuration, use the no
form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
Parameters
n seconds — Polling interval in seconds (Range: 60-86400)
Default Setting
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the polling time for the Simple Network Time Protocol (SNTP)
client to 120 seconds.
Console(config)# sntp client poll timer 120