Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 6-3
Clock Commands
clock timezone
The clock timezone Global Configuration mode command sets the time zone for display
purposes. To set the time to the Coordinated Universal Time (UTC), use the no form of this
command.
Syntax
clock timezone hours-offset [minutes minutes-offset] [zone acronym]
no clock timezone
Parameters
n hours-offset — Hours difference from UTC. (Range: -12 – +13)
n minutes-offset — Minutes difference from UTC. (Range: 0–59 minutes)
n acronym — The acronym of the time zone. (Range: Up to 4 characters)
Default Setting
Clock set to UTC.
Command Mode
Global Configuration mode
Command Usage
The system internally keeps time in UTC, so this command is used only for display purposes and
when the time is manually set.
Example
The following command sets the time zone to 6 hours difference from UTC.
Console(config)# clock timezone -6 zone CST