Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 5-21
Address Table Commands
show ports security addresses
The show ports security addresses Privileged EXEC mode command displays the current
dynamic addresses in locked ports.
Syntax
show ports security addresses
[ethernet interface | port-channel port-channel-number]
Parameters
n interface — A valid Ethernet port.
n port-channel-number — A valid port-channel number
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC Mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the dynamic addresses in currently locked ports.
The following command displays the dynamic addresses in currently locked port e1.
Console# show ports security addresses
Port Status Learning Current Maximum
---- -------- -------- ------- -------
e1 Disabled Lock - 1
e2 Disabled Lock - 1
e3 Enabled Max-addresses 0 1
e4 Port is a member in port-channel ch1
e5 Disabled Lock - 1
e6 Enabled Max-addresses 0 10
ch1 Enabled Max-addresses 0 50
ch2 Enabled Max-addresses 0 128
Console# show ports security addresses ethernet e1
Port Status Learning Current Maximum
---- -------- -------- ------- -------
e1 Disabled Lock - 1