Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 2-23
802.1x Commands
show dot1x advanced
The show dot1x advanced Privileged EXEC mode command displays 802.1x advanced features
for the device or specified interface.
Syntax
show dot1x advanced [ethernet interface]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays 802.1x advanced features for the device.
Console# show dot1x advanced
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN
--------- -------------- ----------
e1 Disabled Enabled
e2 Enabled Disabled
Console# show dot1x advanced ethernet e1
Interface Multiple Hosts Guest VLAN
--------- -------------- ----------
e1 Disabled Enabled
Single host parameters
Violation action: Discard
Trap: Enabled
Trap frequency: 100
Status: Single-host locked
Violations since last trap: 9