Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

28-12 www.hp.com HP PC Blade Switch CLI Reference Guide
VLAN Commands
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode command
disables port ingress filtering. Ingress filtering discards frames to VLAN where port does not
belong. To return to the default configuration, use the no
form of this command.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Parameters
There are no parameters for this command.
Default Setting
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following
command s disable port ingress filtering on Ethernet port e42.
Console(config)# interface ethernet e42
Console(config-if)# switchport general ingress-filtering disable