Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

27-6 www.hp.com HP PC Blade Switch CLI Reference Guide
User Interface Commands
exit (Configuration)
The exit command exits any configuration mode to the next highest mode in the CLI mode
hierarchy.
Syntax
exit
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
All configuration modes
Command Usage
There are no user guidelines for this command.
Example
The following
command changes the configuration mode from Interface Configuration mode to
Privileged EXEC mode.
Console(config)#Console(config-if)# exit
Console(config)# exit
Console#