Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

27-2 www.hp.com HP PC Blade Switch CLI Reference Guide
User Interface Commands
enable
The enable User EXEC mode command enters the Privileged EXEC mode.
Syntax
enable
[privilege-level]
Parameters
n privilege-level — Privilege level to enter the system. (Range: 1-15)
Default Setting
The default privilege level is 15.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following
command enters the Privileged EXEC mode.
Console> enable
enter password:
Console#