Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

26-4 www.hp.com HP PC Blade Switch CLI Reference Guide
TACACS+ Commands
tacacs-server timeout
The tacacs-server timeout Global Configuration mode command sets the interval during which
the device waits for a TACACS+ server to reply. To return to the default configuration, use the
no form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
Parameters
n timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Setting
5 seconds
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following
command sets the timeout value to 30.
Console(config)# tacacs-server timeout 30