Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

25-12 www.hp.com HP PC Blade Switch CLI Reference Guide
System Management Commands
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Parameters
There are no parameters for this command.
Default Setting
There is no default configuration for this command.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following
command lists open Telnet sessions.
The following table describes significant fields shown in the example.
Console> show sessions
Connection Host Address Port Byte
---------- ------------- ---------- ----- ----
1 Remote device 172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8
Field Description
Connection Connection number.
Host Remote host to which the device is connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to see on the connection.