Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

25-10 www.hp.com HP PC Blade Switch CLI Reference Guide
System Management Commands
hostname
The hostname Global Configuration mode command specifies or modifies the device host name.
To remove the existing host name, use the no form of the command.
Syntax
hostname name
no hostname
Parameters
n name — The host name. of the device. (Range: 1-158 characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following
command specifies the device host name.
Console(config)# hostname HP
HP(config)#