Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

25-4 www.hp.com HP PC Blade Switch CLI Reference Guide
System Management Commands
Examples
The following command discovers the routes that packets will actually take when traveling to
their destination.
The following table describes significant fields shown in the example.
The following table describes characters that may appear in the traceroute command output.
Console# traceroute 192.168.2.5
Tracing the route to 192.168.2.5 (192.168.2.5), 30 hops max, 40 byte packets
Type Esc to abort.
1 192.168.2.5 (192.168.2.5) <20 ms <20 ms <20 ms
Trace complete.
Console#
Field Description
1 Indicates the sequence number of the device in the path to the host.
i2-gateway.stanford.edu Host name of this device.
192.68.191.83 IP address of this device.
1 msec 1 msec 1 msec Round-trip time for each probe sent.
Field Description
* The probe timed out.
? Unknown packet type.
A Administratively unreachable. Usually, this output indicates that
an access list is blocking traffic.
F Fragmentation is required and DF is set.
H Host unreachable.
N Network unreachable.
P Protocol unreachable.
QSource quench.
R Fragment reassembly time exceeded.
S Source route failed.
U Port unreachable.