Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 2-15
802.1x Commands
show dot1x users
The show dot1x users Privileged EXEC mode command displays active 802.1x authenticated
users for the device.
Syntax
show dot1x users [username username]
Parameters
n username — Supplicant username (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following commands display 802.1x users.
The following table describes the significant fields shown in the example:
Console# show dot1x users
Port Username Session Time Auth Method MAC Address
----- -------- ------------ ----------- --------------
e1 Bob 1d:03:08.58 Remote 0008:3b79:8787
e2 John 08:19:17 None 0008:3b89:3127
Console# show dot1x users username
Bob
Username: Bob
Port Username Session Time Auth Method MAC Address
----- -------- ------------ ----------- --------------
e1 Bob 1d:03:08.58 Remote 0008:3b79:8787
Keyword Description
Port The port number.
Username The username representing the identity of the Supplicant.
Session Time The period of time the Supplicant is connected to the system.
Authentication Method Authentication method used by the Supplicant to open the session.
MAC Address MAC address of the Supplicant.