Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 22-23
Spanning-Tree Commands
show (mst)
The show MST Configuration mode command displays the current or pending MST region
configuration.
Syntax
show {current | pending}
Parameters
n current — Indicates the current region configuration.
n pending — Indicates the pending region configuration.
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
Command Usage
The pending MST region configuration takes effect only after exiting the MST configuration
mode.
Example
The following command displays a pending MST region configuration.
console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance VLANs Mapped State
-------- ------------ -------
0 1-9,21-4094 Enabled
1 10-20 Enabled