Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 22-1
22
Spanning-Tree Commands
spanning-tree
The spanning-tree Global Configuration mode command enables spanning-tree functionality.
To disable spanning-tree functionality, use the no
form of this command.
Syntax
spanning-tree
no spanning-tree
Parameters
There are no parameters for this command.
Default Setting
Spanning-tree is enabled. The MSTP-RSTP conversion parameter is enabled, which maps
VLAN 1 to instance 1 and VLAN 2 to instance 2. This default provides interoperability with
PVST/PVST+ by treating each MSTP instance as a separate spanning tree using standard RSTP
and STP BPDUs.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables spanning-tree functionality.
Console(config)# spanning-tree