Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

21-22 www.hp.com HP PC Blade Switch CLI Reference Guide
SNMP Commands
show snmp groups
The show snmp groups Privileged EXEC mode command displays the configuration of groups.
Syntax
show snmp groups [groupname]
Parameters
n groupname — Specifies the name of the group. (Range: 1-30)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configuration of views.
The following table describes significant fields shown in the example.
Console# show snmp groups
Name Security Views
Model Level Read Write Notify
-------------- ----- ----- ------- ------- -------
user-group V3 priv Default "" ""
managers-group V3 priv Default Default ""
managers-group V3 priv Default "" ""
Field Description
Name Name of the group.
Security Model SNMP model in use (v1, v2 or v3).
Security Level Authentication of a packet with encryption. Applicable only to the SNMP
v3 security model.
Views Read Name of the view that enables only viewing the contents of the agent. If
unspecified, all objects except the community-table and SNMPv3 user and
access tables are available.
Write Name of the view that enables entering data and managing the contents of
the agent.
Notify Name of the view that enables specifying an inform or a trap.