Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 21-15
SNMP Commands
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact
(sysContact) string. To remove system contact information, use the no form of the command.
Syntax
snmp-server contact
text
no snmp-server contact
Parameters
n text — Specifies the string that describes system contact information.
(Range: 0-160 characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following command configures the system contact point called HP_Technical_Support.
Console(config)# snmp-server contact HP_Technical_Support