Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

20-16 www.hp.com HP PC Blade Switch CLI Reference Guide
RMON Commands
show rmon log
The show rmon log User EXEC mode command displays the RMON log table.
Syntax
show rmon log
[event]
Parameters
n event — Specifies the event index. (Range: 0 - 65535)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the RMON log table.
The following table describes the significant fields shown in the display:
Console> show rmon log
Maximum table size: 500
Event Description Time
------- -------------- ---------
1 Errors Jan 18 2005 23:48:19
1 Errors Jan 18 2005 23:58:17
Console> show rmon log 1
Maximum table size: 500 (800 after reset)
Event Description Time
------- -------------- ---------
1 Errors Jan 18 2005 23:48:19
1 Errors Jan 18 2005 23:58:17
Field Description
Event An index that uniquely identifies the event.
Description A comment describing this event.
Time The time this entry was created.