Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 20-15
RMON Commands
show rmon events
The show rmon events User EXEC mode command displays the RMON event table.
Syntax
show rmon events
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the RMON events table.
The following table describes significant fields shown in the example:
Console> show rmon events
Index Description Type Community Owner Last Time Sent
--- ------------- -------- --------- ------ -------------------
-
1 Errors Log CLI Jan 18 2005
23:58:17
2 High Broadcast Log-Trap device Manager Jan 18 2005
23:59:48
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the
case of log, an entry is made in the log table for each event. In the
case of trap, an SNMP trap is sent to one or more management
stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.