Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

19-6 www.hp.com HP PC Blade Switch CLI Reference Guide
RADIUS Commands
radius-server timeout
The radius-server timeout Global Configuration mode command sets the interval during which
the device waits for a server host to reply. To return to the default configuration, use the no
form
of this command.
Syntax
radius-server timeout timeout
no radius-server timeout
Parameters
n timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Setting
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the timeout interval to 5 seconds.
Console(config)# radius-server timeout 5