Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 15-3
PHY Diagnostics Commands
show copper-ports cable-length
The show copper-ports cable-length User EXEC mode command displays the estimated copper
cable length attached to a port.
Syntax
show copper-ports cable-length [interface]
Parameters
n interface — A valid Ethernet port. (Full syntax: port)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The port must be active and working in 100M or 1000M mode.
Example
The following command displays the estimated copper cable length attached to all ports.
Console> show copper-ports cable-length
Port Length [meters]
---- ---------------------
e43 < 50
e44 Copper not active
e45 110-140
e46 Fiber