Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

1-8 www.hp.com CLI Reference Guide
Command Line Interface
RADIUS Commands Specify the source IP address used for communication
with Remote Authentication Dial-in User Service
(RADIUS) servers, and display the RADIUS server
settings.
19-1
RMON Commands Display the Remote Network Monitoring (RMON)
Ethernet history statistics, alarms table and
configuration.
20-1
SNMP Commands Configure the community access string to permit
access to the Simple Network Management Protocol
(SNMP) server, create or update SNMP server entries,
and specify SNMP engineID.
21-1
Spanning-Tree Commands Configure the spanning-tree functionality. 22-1
SSH Commands Display the Secure Socket Shell (SSH) public keys on
the device, SSH server configuration, or which SSH
public key is manually configured.
23-1
Syslog Commands Log messages to a syslog server, or limit log messages
to a syslog server.
24-1
System Management
Commands
Display and list system, version or Telnet session
information.
25-1
TACACS+ Commands Display configuration and statistical information about
a Terminal Access Controller Access Control System
(TACACS+) server, or specify a TACACS+ host.
26-1
User Interface Commands Display and list system, version or Telnet session
information.
27-1
VLAN Commands Enter the (Virtual Local Area Network) VLAN
Configuration mode, enable simultaneously
configuring multiple VLANs, or adds or remove
VLANs.
28-1
Web Server Commands Enable configuring the device from a browser, or
display the HTTP server configuration.
29-1
Command Group Description Page