Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 13-9
Line Commands
show line
The show line User EXEC mode command displays line parameters.
Syntax
show line [console | telnet | ssh]
Parameters
n console — Console terminal line.
n telnet — Virtual terminal for remote console access (Telnet).
n ssh — Virtual terminal for secured remote console access (SSH).
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
If line is not specified information for all lines is given.
Example
The following command displays the line configuration.
Console> show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10