Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

12-4 www.hp.com HP PC Blade Switch CLI Reference Guide
LACP Commands
show lacp ethernet
The show lacp ethernet Privileged EXEC mode command displays LACP information for
Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
n parameters — Link aggregation parameter information.
n statistics — Link aggregation statistics information.
n protocol-state — Link aggregation protocol-state information.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
All LACP statistics is shown if no keyword is specified.
LACP should be enabled for selected Ethernet port.
Example
The following command displays LACP information for Ethernet port e45.
Console# show lacp ethernet e45
Port e45 LACP parameters:
Actor
system priority: 1
system mac addr: 00:00:12:34:56:78
port Admin key: 30
port Oper key: 30
port Oper number: 21
port Admin priority: 1
port Oper priority: 1
port Admin timeout: LONG
port Oper timeout: LONG
LACP Activity: ACTIVE
Aggregation: AGGREGATABLE
synchronization: FALSE
collecting: FALSE