Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 12-3
LACP Commands
lacp timeout
The lacp timeout Interface Configuration (Ethernet) mode command assigns an administrative
LACP timeout. To return to the default configuration, use the no
form of this command.
Syntax
lacp timeout {long | short}
no lacp timeout
Parameters
n long — Specifies the long timeout value.
n short — Specifies the short timeout value.
Default Setting
The default port timeout value is long.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following command assigns a long administrative LACP timeout to Ethernet port e45.
Console(config)# interface ethernet e45
Console(config-if)# lacp timeout long