Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

11-14 www.hp.com HP PC Blade Switch CLI Reference Guide
IP Addressing Commands
clear host dhcp
The clear host dhcp Privileged EXEC mode command deletes entries from the host
name-to-address mapping received from Dynamic Host Configuration Protocol (DHCP).
Syntax
clear host dhcp {name |
*}
Parameters
n name — Specifies the host entry to be removed. (Range: 1-158 characters)
n * — Removes all entries.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
This command deletes the host name-to-address mapping temporarily until the next renewal of
the IP address.
Example
The following command deletes all entries from the host name-to-address mapping.
Console# clear host dhcp *