Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

11-4 www.hp.com HP PC Blade Switch CLI Reference Guide
IP Addressing Commands
show ip interface
The show ip interface Privileged EXEC mode command displays the usability status of
configured IP interfaces.
Syntax
show ip interface [ethernet interface-number | vlan
vlan-id | port-channel port-channel
number]
Parameters
n interface-number — Valid Ethernet port.
n vlan-id — Valid VLAN number.
n port-channel number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configured IP interfaces and their types.
Console# show ip interface
Gateway IP
Address
Type Activity Status
------------------ ------ ---------------
10.7.1.1 Static Active
IP address Interface Type
------------- --------- -------
10.7.1.192/24 VLAN 1 Static
10.7.2.192/24 VLAN 2 DHCP