Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 10-7
IGMP Snooping Commands
show ip igmp snooping mrouter
The show ip igmp snooping mrouter User EXEC mode command displays information on
dynamically learned multicast device interfaces.
Syntax
show ip igmp snooping mrouter [interface
vlan-id]
Parameters
n vlan-id — VLAN number.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays multicast device interfaces in VLAN 1000.
Console> show ip igmp snooping mrouter interface 1000
VLA
N
Ports
---- -----
1000 e45
Detected multicast routers that are forbidden statically:
VLA
N
Ports
---- -----
1000 e43