Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 10-5
IGMP Snooping Commands
ip igmp snooping mrouter learn-pim-dvmrp
The ip igmp snooping mrouter learn-pim-dvmrp Interface Configuration (VLAN) mode
command enables automatic learning of multicast router ports in the context of a specific VLAN.
To remove automatic learning of multi-cast router ports, use the no form of this command.
Syntax
ip igmp snooping mrouter learn-pim-dvmrp
no ip igmp snooping mrouter learn-pim-dvmrp
Default Configuration
Automatic learning of multicast router ports is enabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
The following command enables automatic learning of multicast router ports on VLAN 2.
Console(config)# interface vlan 2
Console(config-if)#console(config-if)# ip igmp snooping mrouter learn-pim-dvmrp