Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 9-5
GVRP Commands
gvrp registration-forbid
The gvrp registration-forbid Interface Configuration (Ethernet, port-channel) mode command
de-registers all dynamic VLANs on a port and prevents VLAN creation or registration on the
port. To allow dynamic registration of VLANs on a port, use the no
form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Parameters
There are no parameters for this command.
Default Setting
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following command forbids dynamic registration of VLANs on Ethernet port g45.
Console(config)# interface ethernet g45
Console(config-if)# gvrp registration-forbid