Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

8-14 www.hp.com HP PC Blade Switch CLI Reference Guide
Ethernet Configuration Commands
show interfaces configuration
The show interfaces configuration Privileged EXEC mode command displays the configuration
for all configured interfaces.
Syntax
show interfaces configuration [ethernet
interface | port-channel port-channel-number]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
n port-channel-number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Modes
Privileged
EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configuration of all configured interfaces:
Console# show interfaces configuration
Port Type Duplex Speed Neg Flow
Ctrl
Link
State
Back
Pressure
Mdix
Mode
---- ----------- ------ ----- ------- ---- ----- -------- ----
e1 100M-Copper Full 100 Enabled Off Up Disabled Auto
e2 100M-Copper Full 100 Enabled Off Up Disabled Auto
e3 100M-Copper Full 100 Enabled Off Up Disabled Auto
e4 100M-Copper Full 100 Enabled Off Up Disabled Auto
e5 100M-Copper Full 100 Enabled Off Up Disabled Auto
e6 100M-Copper Full 100 Enabled Off Up Disabled Auto
e7 100M-Copper Full 100 Enabled Off Up Disabled Auto
e8 100M-Copper Full 100 Enabled Off Up Disabled Auto
e9 100M-Copper Full 100 Enabled Off Up Disabled Auto
e10 100M-Copper Full 100 Enabled Off Up Disabled Auto
e11 100M-Copper Full 100 Enabled Off Up Disabled Auto
e12 100M-Copper Full 100 Enabled Off Up Disabled Auto
e13 100M-Copper Full 100 Enabled Off Up Disabled Auto
e14 100M-Copper Full 100 Enabled Off Up Disabled Auto
e15 100M-Copper Full 100 Enabled Off Up Disabled Auto
e16 100M-Copper Full 100 Enabled Off Up Disabled Auto