Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-13
Ethernet Configuration Commands
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays auto negotiation data.
Syntax
show interfaces advertise [ethernet
interface | port-channel port-channel-number]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
n port-channel-number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Modes
Privileged
EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays auto negotiation information.
Console# show interfaces advertise
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
e1 100M-Copper Enabled --
e2 100M-Copper Enabled --
e3 100M-Copper Enabled --
e4 100M-Copper Enabled --
e5 100M-Copper Enabled 100f, 100h, 10f, 10h
e6 100M-Copper Enabled --
e7 100M-Copper Enabled --
e8 100M-Copper Enabled --
e9 100M-Copper Enabled --
e10 100M-Copper Enabled --
e11 100M-Copper Enabled --
e12 100M-Copper Enabled --
e13 100M-Copper Enabled --
e14 100M-Copper Enabled --
e15 100M-Copper Enabled --
e16 100M-Copper Enabled --